United States Air Force Academy   Right Corner Banner
Join the Air Force

News > Feature - New 'milkstool' design may save dollars, backs
 
Photos 
New 'milkstool' design may save dollars, backs
Loadmasters and a crew from the 447th Expeditionary Logistics Readiness Squadron at Sather Air Base, Iraq, load a baggage pallet onto a C-130 Hercules June 3, 2008. Sitting on the C-130's cargo ramp is a "milkstool": a ramp support platform that may, in coming years, be replaced with a more lightweight version designed by Air Force Academy cadets. (U.S. Air Force photo/Tech. Sgt. Jeffrey Allen)
Download HiRes
New 'milkstool' design may save dollars, backs

Posted 6/1/2011   Updated 6/2/2011 Email story   Print story

    


by Don Branum
Academy Spirit staff


6/1/2011 - U.S. AIR FORCE ACADEMY, Colo. -- A C-130 Hercules ramp support platform designed by four cadets here in May could save not only Air Force dollars but also the backs of the loadmasters who currently drag around 75-pound monstrosities.

The newly designed "milkstool," as the ramp support platform is called, would weigh 20 pounds while supporting a Herculean load of up to 61 tons, according to a presentation by Cadets Aadit Patel, Zachary Peters, Jeremy Robben and Joshua Yeaste to the Air Force Academy's Department of Mechanical Engineering on May 5.

The department has begun discussions with the Air Force engineering authority at Robins Air Force Base, Ga., to determine testing requirements for the new milkstool, said Maj. Trent Greenwell, a mechanical engineering instructor who served as the cadets' adviser for the redesign project. The new design could be incorporated into a technical order supplement as early as 2012, depending on when the milkstool fulfills the test requirements.

The cadets began their project in the spring semester as part of their Mechanical Engineering 499 class: an independent study on one of several topics approved by the department head. Cadet Peters, now a senior with Cadet Squadron 24, said the ramp support platform interested him because of its potential application to the operational Air Force.

"One day, a loadmaster could be using what we designed," said Cadet Peters, a native of Columbus, Ohio. "This could help the C-130 community."

Major Greenwell guided the four through a systems engineering process that included preliminary and critical design reviews, development of a prototype and procedure validation and verification.

The cadets began their semester-long project by researching users' requirements. To find out what loadmasters needed from a milkstool, they visited the 52nd Airlift Squadron, part of Air Force Reserve Command's 302nd Airlift Wing at Peterson Air Force Base.

"While in a deployed environment, a loadmaster may lift the milkstool more than 10 times on a normal mission," said Master Sgt. A.K. Roberts, loadmaster superintendent for the 52nd Airlift Squadron at Peterson AFB. "That may not sound like much, but when you take into account the heat and hydration issues that come with flying these missions, a lightweight design would help tremendously."

Loadmasters must also lift the milkstool over cargo or carry it outside the aircraft and in through the crew door due to the cargo configuration -- a process that Sergeant Roberts described as "very cumbersome."

In their Feb. 15 preliminary design review, the cadets concluded the new milkstool must support at least 27,700 pounds without failing, weigh 50 pounds or less -- preferably less than 35 pounds, Cadet Peters said -- and be durable enough to survive the rough working environments in which C-130s take off and land.

"It has to be quickly deployable for combat environments," Cadet Peters said. "And it has to function anywhere in the world, from deserts to tropical environments to the Antarctic, because C-130s fly to all of those locations."

The team brainstormed ideas, including an inflatable bag to a one-column support structure. They faced both budgetary and time constraints, Cadet Peters said.

"We took our timeline and said, 'What's feasible?'" he said.

They presented their ideas in the preliminary design review and opened the floor to suggestions from Mechanical Engineering instructors and staff. They got support from instructor Maj. Matthew Obenchain and materials scientist Megan LaBahn, along with others, Cadet Peters said.

After the first review, the cadets split their responsibilities: materials, manufacturing, modeling and analysis. Cadet Peters took charge of materials.

"I started out with 7075 aluminum for initial analysis," he said. "I used some information that Ms. LaBahn gave me." Aluminum 7075 is an alloy of aluminum, zinc, magnesium and copper used in some airframes. Unfortunately, it turned out to be too rare for the cadets to procure it, and the second option was also out. The group went back to the drawing board.

"We ended up going with 6061-T6 aluminum," Cadet Peters said. "It's lightweight, really cheap and readily available in sizes we could work with."

While the 6061-T6 metal has less tensile strength than 7075 aluminum, it proved to be sufficient for the cadets. Their design, which incorporates four columns with flat top and bottom surfaces, withstood nearly 4½ times the required weight without permanent deformation, Major Greenwell said.

The team received the prototype just in time to present it at the Colorado Springs Undergraduate Research Forum, where it received glowing reviews, Cadet Peters said.

"People loved it. Everyone who was there for our presentations wanted to stay afterward and talk to us about it," he said.

One reason why visitors to CSURF liked the prototype might be the production cost: anywhere from $100 to $150 apiece, according to Major Greenwell.

"A maintenance shop could build it from readily available parts," Cadet Peters said. "They could weld it together ... and put the wooden deck on top of it to fit the ramp if they needed a spare."

The simplicity and ease of construction would allow the Air Force to bypass the process of seeking outside vendors or sourcing a contract to build the new ramp supports, Major Greenwell said.
While the independent study is complete and the prototype built, the four-cadet team hasn't seen the last of their milkstool. Cadet Peters seemed okay with that possibility.

"I enjoyed the project a lot," he said. "Our team really worked well together, and Major Greenwell and the people in the (mechanical engineering) lab helped us out a lot. We worked hard, but we had fun, and we're happy with what we got out of it."

And if all goes well at Robins, a lot of other Airmen might be happy with it, too.



tabComments
No comments yet.  
Add a comment

 Inside USAFA

ima cornerSearch

tabAir Force Academy Social Media
  Facebook Twitter Flickr YouTube
  More info on our Social Media page.
tabAcademy News
tabAcademy Links
tabOther Academy Sites

Site Map      Contact Us     Questions     USA.gov     Security and Privacy notice     E-publishing  
Suicide Prevention    SAPR   IG   EEO   Accessibility/Section 508   No FEAR Act